Alfarubber

Rubber to metal bonded components are extremely crucial for various industrial applications. Rubber to metal bonded components are made by ways of rubber to metal bonding. This is a process wherein a rubber part is combined with a metal part. Processes of Rubber to Metal Bonding Rubber to metal bonding is generally done by two common processes. These are: ·          Transfer molding - In this method, the metal parts are inserted into a heated mold and the solid rubber then pushed into the mold. Thereafter, the mold is cured and vulcanized. ·          Injection molding - This is similar to the transfer molding process but here, a metal piece is first inserted into the mold and then a liquid elastomer injected into it. Once the mold is cured, the part is removed. Steps in Rubber to Metal Bonding Rubberto metal bonding runs through several steps. These steps are: ·          Elastomer preparation - The isolation mounts are generally made either with natural rubber or neop

A Rubber O-Ring is best described as a donut shaped mechanical rubber gasket that is used for static and dynamic industrial applications. Rubber O-Ring comes with several benefits. Some of the benefits are as follows: Rubber O-Rings are easy to manufacture Their cost of production is low They can resist pressure They can be mounted easily They can withstand high temperatures Rubber O-Ring comes in different types of rubber compounds. Some of the common materials used for making these rings are silicon, nitrile, viton and some other types of synthetic rubber materials. There are various types of rubber O rings available in the market. Some of the major types of these rings are - ·          Backup O Rings - The backup Orings are used to enhance the performance of the chief O rings. The backup O rings protect the seal of the main Oring under conditions of high pressure and temperature. With their help, the main O rings are not only able to perform better but they also last much